Our Best Winterizing Techniques: 5 Ways to Secure Pipe Bursts

Explore Now

 

Are you in search of tips concerning How to stop pipes from freezing during the winter?


Prevent Freezing and Bursting Pipes
All property owners who live in warm environments need to do their finest to winterize their pipes. It is something you have to do throughout fall prior to deep wintertime absolutely starts. Failure to do so can spell disaster like icy, broken, or burst pipelines. Here are some convenient winterizing hacks to maintain your plumbing system secured even if the climate outside is frightful.

 

Attempt a Hair Dryer or Heat Gun


When your pipelines are virtually freezing, your trusty hair dryer or warm gun is a blessing. If the hot towels do not help displace any type of working out ice in your pipes, bowling warm air directly right into them might assist. You may end up harmful your pipelines while trying to thaw the ice.

 

Open Up Closet Doors Hiding Plumbing


It would certainly be practical to open up closet doors that are concealing your pipelines when it's cold outside. They could be someplace in your cooking area or washroom. This will certainly allow the cozy air from your heating system to circulate there. Consequently, you protect against these subjected pipelines from freezing. Doing this little technique can maintain your pipelines warm as well as restrict the possibly dangerous results of freezing temperature levels.

 

Take Time to Cover Exposed Pipes


One cool as well as simple hack to heat up freezing pipes is to cover them with cozy towels. You can additionally make use of pre-soaked towels in warm water, just don't forget to wear protective gloves to safeguard your hands from the heat.

 

Turn On the Faucets


When the temperature decreases and also it appears as if the frigid temperature will certainly last, it will certainly assist to switch on your water both inside and outdoors. This will certainly maintain the water streaming with your plumbing systems. On top of that, the activity will certainly decrease the freezing process. Notably, there's no requirement to turn it on full force. You'll end up squandering gallons of water in this manner. Rather, go for concerning 5 decreases per min.

 

When Pipes are Frozen, shut Off Water


If you observe that your pipelines are entirely frozen or almost nearing that phase, turn off the primary water valve quickly. You will usually find this in your cellar or utility room near the heating system or the front wall surface closest to the street. Turn it off immediately to prevent more damage.
With even more water, even more ice will load up, which will at some point lead to burst pipes. If you are uncertain about the state of your pipes this winter season, it is best to call an expert plumber for an evaluation.
All homeowners who live in temperate climates must do their finest to winterize their pipelines. Failure to do so can lead to disaster like icy, broken, or burst pipes. If the warm towels do not aid dislodge any type of resolving ice in your pipes, bowling hot air directly into them may help. Turn off the primary water shutoff promptly if you discover that your pipes are completely frozen or practically nearing that stage. With more water, more ice will pile up, which will at some point lead to burst pipelines.

 

How To Keep Your Pipes From Freezing This Winter

 

How Cold Does It Have to Be for Pipes to Freeze?

 

Before we get into what you can do to prevent your pipes from freezing, let’s first make sure that you can answer the question, “When do pipes freeze?”


In general, you should expect your pipes to potentially freeze once the temperature gets close to 32 degrees Fahrenheit.


It’s also important to recognize that, even if you live in a warmer climate, you’re not immune from having to deal with frozen pipes.


In some cases, you may even be at a higher risk. This is because your pipes aren’t insulated well enough to handle colder temperatures.


Pipes are also at a greater risk of freezing if they’re located in the basement or the attic of your home. This is because they’re not able to get as much heat as pipes in other parts of your home are.


So, when you’re taking precautions to prevent your pipes from freezing, make sure that you pay special attention to pipes in those areas.

 

Common Signs of Frozen Pipes

 

Now that you know how to keep your pipes from freezing, let’s talk about a few of the most common signs that it’s too late.


If your pipes have already frozen, it’s important to get professional help as soon as possible. If you know what to watch out for, you’ll be able to act much faster — potentially saving you from serious disaster.


Interestingly, one of the biggest signs of a frozen pipe is a nasty, strange smell from the drain in a sink or even the faucet itself. This is because the smell can’t filter out of the pipe, and instead is forced to come back up towards your home.


You may also see visible signs of frost on the outside of your pipe, which is an almost certain sign that it’s already frozen.


Of course, you may not even be able to get water to run out of your pipe. If you turn on your faucet but no water (or only a few random drips) come out? Then it’s likely that they’ve frozen.


You might also hear whistling and banging coming from the pipes, or even strange bubbling sounds when you flush a toilet.


Finally, take a look at your drywall and ceilings. If you notice any kind of dampness, puddles, or rings, there’s a serious issue.


Remember that, the longer you wait to thaw out the pipe, the more likely it is that it will burst. You don’t want to deal with the expense of replacing a pipe as opposed to thawing it. You especially want to avoid damage to your floors and personal property.


Get in touch with a plumbing professional to get a handle on the situation as soon as possible.

 

Check out Your Current Insulation

 

Earlier on in this post, we spoke about the importance of making sure that pipes in less visited areas of your home, like your basement or attic, got enough attention.


Take a look at your insulation in these areas, and determine if it might be smart to add another layer or two.


So, which materials should you use to properly insulate your pipes?


You can’t go wrong with fiberglass sleeves or even foam rubber. If you’re a bit anxious about properly fitting them on your own, then we suggest that you call in a professional to help you.


This is usually an effective solution for exposed pipes. However, if you have more serious concerns, then it may be the right time to re-insulate your walls and ceilings completely.

 

When in Doubt, Open Your Doors

 

One final tip on how to keep your pipes from freezing?


Believe it or not, keeping your interior doors open may be the solution you’re after.


First of all, keeping things open will allow the heat to circulate better throughout your entire home. Additionally, make sure that you open up your cabinet door if you have pipes underneath the sink.


This will ensure that they’re able to maintain a proper temperature to keep from freezing.

 

DIY Thawing Tips for Frozen Pipes

 

In most cases — and especially if you’re certain that the pipe has seriously frozen — you’ll need the help of a professional to thaw your pipes.


However, if you feel like it hasn’t yet frozen completely, there are a few DIY hacks you can do to speed up the thawing process.


Before you try out any of these tips, make sure that the faucet is completely open (turn both the hot and cold handles if needed.)


Start as close to the faucet as possible to get the most effective and fastest thaw.


If you’re trying to thaw an exposed pipe, you can wrap them in hot towels to slowly bring them back up to a warmer temperature. You can also use a hair dryer, a space heater, or even a heat lamp.


Keep in mind that you’ll need to monitor the pipes during this entire process, as walking away can be seriously dangerous to not only your home but your plumbing as well. In the event that something does burst, know where your main valve water shut off is located and be able to access it quickly.


If the pipes are enclosed, start by turning up the heat in your home. In some cases, this may be enough to thaw them out.


You can also use a small infrared lamp. Hold it up to the area where you know the pipes are located for a few minutes. Sometimes, this will do the trick when it comes to thawing pipes.

https://happyhiller.com/blog/how-to-keep-your-pipes-from-freezing-this-winter/


Prevent Freezing and Bursting Pipes

 

Hopefully you enjoyed reading our part about Prevent Freezing and Bursting Pipes. Thanks a ton for taking time to read through our short article. Loved our write-up? Please share it. Let others check it out. Thank you for taking the time to read it.


Get the best, call!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Our Best Winterizing Techniques: 5 Ways to Secure Pipe Bursts”

Leave a Reply

Gravatar